805-933-0015 ph    
Laser Innovations Contact     


Home        Products & Services        Applications        About Us        Contact Us

 

  532nm.com > VERDI LASER


VERDI DPSS High-Power CW Laser
Coherent Verdi V2, Verdi V5, Verdi V6, Verdi V8, Verdi V10, Verdi V12, Verdi V18

Laser Innovations offers sales, service and support for your Coherent VERDI Laser System.  We service all of the 532nm VERDI Laser Systems as well as the 355nm and 266nm VERDI Laser systems.






 

Specifications:
 

     VERDI LASER
  Verdi V2 Verdi V5 Verdi V6 Verdi V8 Verdi V10 Verdi V12 Verdi V18
Wavelength 532 nm  
Output Power > 2W > 5W > 6W > 8W > 10W > 12W > 18W
Output Power Stability1 ±1%  
Number of Diodes (FAPs) 1 2
Linewidth2 < 5 MHz  
M2 < 1.1  
Noise < 0.03 RMS (Measured from 10 Hz to 1 GHz)  
   
Beam  
Divergence, Full Angle < 0.5 mrad  
Pointing Stability/Drift3 < 2 µrad/°C  
Polarization Ratio > 100:1  Vertical  
1/e2 Beam Diameter4 2.25 mm ±10%  
Beam Exit Location
  (XY ref. bottom/left baseplate)
2.75 x 2.125 in
(6.99 x 5.4 mm)
 
   
Operating Conditions  
Ambient Temperature
   Laser head
   Power Supply
 (during operation)
+15°C to +45°C
+15°C to +35°C
 
Cooling
   Power Supply
   Laser Head

Air-Cooled
Air-cooled (Water Cooling Optional)

Air-Cooled
Closed Loop (Water-cooling)
   
Electrical  
Voltage
   Single-Phase, 3-Wire
100 to 240 VAC  
Frequency 50/60 Hz  
Power Consumption 380 to 780 W 420 to 780 W 900 to 1300 W
Operating Current, max. 7.8A @ 100 VAC 13A @ 100 VAC
   
Mechanical  
Weight
   Laser Head
   Power Supply
 
8 lb (8 kg)
59 lb (27 kg)

18 lb (8 kg)
73 lb (33 kg)
Umbilical
   Length
   Diameter
   Bend Radius, min.

10 ft (3 m)
1.5 in. (3.81 cm)
3.0 in ( 7.62 cm)



4.0 in ( 10.16 cm)
Dimensions, (LxWxH)
   Laser Head
   (w/umbilical bend radius)
   Power Supply
 
(Approximate for shipping)
22 x 6 x 5 in
(56 x 16 x 13 cm)
23 x 17  x 11 in
(59 x 44 x 28 cm)
 
   

   1 Average over 2 hours with a 15 minute warm-up.
   2 Measured over 50 msec with a thermally stabilized reference etalon at maximum specified output power.
   3 Measured as far-field x and y positions over a 25°C to 35°C temperature change.
   4 Located within ~0.5m of exit port.

Specifications are for reference only and do not constitute warranty specifications on serviced lasers by Laser Innovations.

 

 

 

 


Home        Products & Services        Applications        About Us        Contact Us

Avia     Verdi     244nm.com     266nm.com     355nm.com     337nm.com     488nm.com     FAP-I     laserinnovations.com     solidimaging.com
 

 


Laser Innovations; 1150 E. Main Street; Santa Paula, CA 93060
Ph (805) 933-0015     Fax (805) 933-0042

information@laserinnovations.com
View Map
Copyright © 2009-2012  Laser Innovations. All rights reserved. 
 

 


The information on this page is from the Laser Innovations website (www.532nm.com) and is intended for the personal use of the customer only and may not be sold or transmitted to another party. We assume no responsibility for errors or omissions. 
Please note:  "COHERENT", "AVIA" and "VERDI" style logos found within the photographs of this website, of actual Coherent Laser brand laser systems, are registered trademark of Coherent, Inc.
Terms and Conditions of Sales